7 Maintenance Tips to Prolong Tool Life
Your tools are essential to getting the job done on the work site. Imagine the time lost by having to stop to fix a tool, change a battery, or change a blade. In this guide, the experts at Crane Point provide some tips on maintaining your tools’ health so you waste less time on the job site.
Tool Maintenance Checklist to Achieve Maximum Tool Life
Whether you own the best nail gun on the market or a basic power drill, you want to protect your investment. See the power tool maintenance tips below and learn how to properly take care of your equipment.
1. Store Tools Properly
First and foremost, proper tool storage is highly important. Keep your tools away from wet or extremely dirty environments. Storing your tool in moist environments can cause your tool to rust or lose electrical components. This kind of storage can also be a safety risk due to the electrical nature of most tools. Make sure to store your tools inside a case or enclosing of some kind. Covering your equipment can help prevent external environments, such as dust, moisture, and heat, from damaging your tool.
2. Stick to a Regular Cleaning Schedule
While having to spend time cleaning your tool after a long day at work sounds the least appealing, it can set you up for success in the oncoming days. Simply clean the outside of your tool to get off any dirt or debris from the day. Make sure to check the whole outside, including any small crevices that could collect debris. Another suggestion is to use your air compressor to blow out tool vents and exhausts.
3. Lubricate Your Tools
Lubricating your power tools leads to longer tool life, maximum performance, and protection from changing temperatures, corrosion, and overheating. There are several lubricants to choose from, so check the user’s manual to find what is best for your tool.
4. Keep the Cord in Proper Shape
The power cords are the most important part of your power tool but often the most overlooked. Examine your cords on a regular basis to expose any cracks, splits, and wear. Exposed wires are a safety hazard; they can start fires and cause short circuits.
5. Replace Worn Parts
As your use your tools, parts are going to wear down. Replacing those parts will help the longevity of your equipment. Examples of common replacements are carbon brushes, drive belts, and monitors. Keeping up with replacements will keep you from spending more money on new tools.
6. Calibrate Your Power Tools
Power tools have several moving parts that must remain taken care of. Keeping your tool parts in alignment aids in the longevity of the equipment’s life. Every tool has a user manual that outlines a maintenance schedule and when you should have it recalibrated.
7. Let Your Tools Cool Down
Some power tools can be used on a frequent and harsh basis. When the equipment is overworked, it can cause the motor to overheat. When this happens, you need to stop using the tool and let it cool down. Continued use of the tool while overheating can wear down the motor or burn out parts.
Crane Point Industrial Can Fulfill All Your Power Tool Maintenance Needs
At Crane Point Industrial, we can help you find the right solution at the right price for all your power tool needs. We proudly carry a vast selection of the highest quality products from leading manufacturers. In addition, we supply construction accessories, structural hardware, and quality fasteners. We’re also here to help if you need contractor direct sales, jobsite delivery service, and industrial tool repair for power tool maintenance.
Have questions?Contact our team today.